Shenzhen Hongxinteng Technology Co., Ltd.
Add to Cart
GKG GT++ Printing Product Introduction
GT++ automatic tin paste printing press is a high-end model for SMT high-end application.
1. Drip cleaning system
Drip cleaning structure, effectively prevent the solvent tube blockage cause no solvent while cleaning and poor cleaning effect.
2. Total new squeegee blade structure design
Through sliding rail and air cylinder new pattern squeegee blade structure, increase movement stability and prolonging the service life.
3. Guide Rail positioning System
New pattern patented guide rail can detachable, programmable flexible side clamp, specific toFPC, PCBwarpage, perform a unique clamping plate device. Through software programming can automatically stretch out and draw back unaffected PCB thickness.
4. CCD digital camera system
Total new optical path system, uniform circular light and high brightness of coaxial light source. With both light source system, brightness can adjust to an infinite loop, allowing different mark point can be easily recognize(including uneven mark point) such as tin plating, copper plating, silver plating, hot air soldering, FPC and various types of different PCB color.
5. High precision adjustable PCB thickness lift up platform
Advance design, compact structure, high reliability, Smooth and stable lift up/down platform, pin height automatically adjust by software control. Precisely realize different types of PCB thickness position height adjust.
6. New multi-function interface
Simplicity, Clearly understand, friendly user. Actual temperature and humidity monitor function.
| Model | GT++ |
| Max PCB Size | 510x510mm |
| Min PCB size | 50x50mm |
| PCB thickness | 0.4-6mm |
| Max board weight | 5kg |
| Transport height | 900±40mm |
| Board edge gap | 2.5mm |
| Board height | 23mm |
| Transport direction | L-R,R-L |
| Transport speed | max 1500mm/s, program control |
| Transport method | One stage |
| PCB positioning (support method) | Magnetic pin/support block/auto up-down table |
| PCB clamping system | Patented over the top clamping |
| Side clamping | |
| Adsorption function | |
| Print snap-off | 0-20mm |
| Print mode | one/twice |
| Print Speed | 10-200mm/sec |
| Print Mode | One /Twice |
| Squeegee Type | Rubber /steel Squeegee Blade(Angle 45°/55°/60°) |
| Print pressure | 0.5-10kg |
| Template fram size | 470*370mm~737*737mm(20-40thickness) |
| Cleaning System | Droops of rain type cleaning system |
| Dry, wet vacuum three modes | |
| Back and forth cleaning | |
| CCD FOV | 10x8mm |
| Fiducial mark types | Standard Fiducial mark shape |
| Pad | |
| Hole | |
| Camera system | Look up/down optics structure |
| CCD digital camera | |
| Geometry pattern match | |
| Repeat position accuracy | ±12.5um@6,CPK≥2.0 |
| Print accuracy | ±18um@6,CPK≥2.0 |
| Print cycle time | <7.5 sec |
| Power supply | AC: 220±10%,50/60HZ, 3.0KW |
| Air pressure | 4~6 kgf/cm² |
| Air consumption | around 5L/min |
| Operating temperature | -20℃~+45℃ |
| Operating humidity | 30%~60% |
| Machine Dimensions (without tower light) | 1,240(L) x 1,410(W) x 1,500 (H)mm |
| Machine Weight | Approx: around 1100Kg |
Widely used in electronics manufacturing, consumer electronics, automobile electronics, communications equipment, aerospace, medical equipment, LED lamps, computers and peripherals, smart home, smart logistics, miniature and high power ratio electronic devices.