Shenzhen Hongxinteng Technology Co., Ltd.
Add to Cart
High Quality Lead Solder Machine with Spray Soldering for PCB Tin Furance DIP Machine and semi autoamatic Dipping Solder Machine for DIP Production Line
Structural features of flux spray furnace:
The nozzle is imported from Taiwan.
The inside of the nozzle is made of brass, and the inner wall is made of a unique hand-polished process, which will not be corroded by flux.
The atomization effect is good, the spray flux is uniform and the flux has good wettability, which can completely remove the oxides on the surface of the circuit board and each plug-in, and at the same time form a uniform anti-oxidation film on the circuit board with low surface tension.
To achieve the best effect of immersion tin soldering.
The principle of the spray furnace is that the atmospheric pressure atomizes the liquid flux into small particles through the nozzle, and coats the surface of the circuit board to improve the welding quality and save more than half of the flux consumption.
| Product Parameters | |
| Brand: | Hongxinteng |
| Model: | HXT-ZD4530DP |
| Solder paste temperature: | 0-350℃ |
| Solder paste capacity: | 75KG |
| Power supply: | AC220V 50HZ |
| Power: | 4.5KW |
| Tin furnace tank size: | 450*300*75mm |
| Dial area: | 390*260*30mm |
| Overall size: | 1150×530×1000mm |
| 1. Introduction of Spray | |
| Inner tank specification: | 300*300*140mm |
| Nozzle model: | Danfoss 1.0 60 degrees |
| Drive form: | Electric |
| 2. Technical Parameters of Spray Furnace | |
| Nozzle diameter: | 1.3mm |
| Water ejection volume: | 0-360ml/min |
| Air usage (continuous flat blowing): | 100l/min |
| Flat blow spray width: | 200mm height 200mm; 300mm height 320mm. |
| Round blow width: | 70mm diameter at 200mm height; 80mm diameter at 300mm height. |
| Atomized average particle size: | 100um |
| Maximum pressure volume: | 5kg/cm² |
| Distance from nozzle to product: | 20-30cm |
| Weight: | 80KG |