Shenzhen Hongxinteng Technology Co., Ltd.
Add to Cart
●Transportation:Input board directly.Stainless steel chain conveyor, durable and special design for aluminum alloy track.Applied floating track for different
stages for preventing deformation.
●Preheatingsystem:Drawer-typeenergy-savingdesign, IR preheating, PID mode temperature control, temperature control accuracy can reach±2℃, the
temperature dropping is≤5℃between preheating zone and soldering zone
●Flux spraying system:Managed by digital control.The motion of the spray nozzle is controlled by stepper motor.Flux supply is controlled automatically
for optimized effect.Exhausting and filter system installed on the top
●The solder pot is made by cast iron with anti-corrosion ceramic coating equipped with two low flowrate nozzles.
●Forced air cooling system.
●PC+PLC control system, Windows 7 operatingsystem, Chinese/English operation interface, process profile/data automatic storage function, lower or higher flux level alarm； lower tin level alarm.
| Modol NO | ETS-300 | ETS-300E |
| Dimension锛歀xWxH(mm) | 3385x1240x1540 | 3385x1190x1540 |
| Weigh | Approx.1150kg | Approx.1100kg |
| Power Supply | 3PH 380V 50HZ | 3PH 380V 50HZ |
| Startup Power | 28KW | 27KW |
| Operation Powr Consumption | 7KW | 6.7KW |
| Control System | PC+PLC | PC+PLC |
| Spraying movement | Step motor | Step motor |
| Spray Pressure | 0.2Mpa~0.4Mpa | 0.2Mpa~0.4Mpa |
| Flux Flow Arrange | option | option |
| Auto Fill Flux | Standard | Standard |
| Exhaust | Top exhaust | / |
| ExhaustDucting Diameter(mm) | Φ250 | Φ250 |
| Exhaust tan power | 370W | / |
| Preheating Mode | IR | IR |
| Control Mode | PID | PID |
| Preheating Zone Number | 2 | 2 |
| Preheating Length(mm) | 1500mm | 1500mm |
| Preheating Temperature | Room temperature~200℃ | Room temperature~200℃ |
| Warm-upTime(min) | Approx.12min(seting:150℃) | Approx.12min(seting:150℃) |
| PCB Width(mm) | 50~300 | 50~300 |
| Convoyor Direction | L→R(Option:R→L) | L→R(Option:R→L) |
| Conveyor Speed(mm/min) | 500~1800 | 500~1800 |
| Conveyor Height(mm) | 750卤20 | 750卤20 |
| Available Component Heigh (mm) | Top120,Bottom15 | Top120,Bottom15 |
| Conveyor Speed Control Mode | Closed loop stepless speed regulationg Inverter | Closed loop stepless speed regulationg Inverter |
| Fingers | 1.Heavy type double hook finge 2.Light double hook finger(Option) | 1.Heavy type double hook finge 2.Light double hook finger(Option) |
| Conveyor Angle | 4~6° | 4~6° |
| Type of solder Pot | Motor drive | Motor drive |
| Solder Pot Material | Casting Iron | Casting Iron |
| Wave Height Adjustment | Digital Control by PC | Digital Control by PC |
| Cooling Method | Air cooling | / |
| Heater Power | 9KW | 220V9KW |
| Solder Pot Temperature | 300°C | 300°℃ |
| Solder Pot Capacity | Approx.350KG | Approx.350KG |
| Wave Drive Power | 180W*2 3PH 220VAC | 180W*2 3PH 220VAC |
| Solder Pot Warm-up Time | Approx.150min(setting:250C) | Approx.150min(setting:250℃) |
| Temperature Control Mode | PID | PID |
| Finger Cleaning System | Brush | / |
Compact structure and small footprint.
PC+PLC control system.
IR preheating, high thermal efficiency and uniform temperature.
Step motor control spraying, more stable and reliable.
Adopts small solder pot, reduces the cost.
