Shenzhen Hongxinteng Technology Co., Ltd.
Add to Cart
Multi Blades V-cut Pcb Separator Cutting Machine HXT-720 LED Board PCB Automatic Depanelizer PCB Router Machine
Features:
1. Using a unique cutting method, circuit board cutting is completed by six blades, and the upper and lower blades form a group to form a cutting unit. They are A, B, C, three groups. The whole cutting process is divided into three stages. The blades of group A first cut 40% of the circuit board, and then the blades of group B run over the groove cut by blade A again, completing 40% of the cutting volume again, and finally the blades of group C cut the final 20% of the cutting and smoothing, because the amount of cutting each time is small, the stress generated during the cutting process is reduced by more than 80% compared with the traditional one-time cutting method. The edge of the divided circuit board is smooth and smooth, and the surface of the board is very smooth, not twisted or warped. It is currently the only machine on the market that can guarantee that the aluminum substrate will not be deformed after cutting
2. Due to multiple cuts, the cutting process is very stable, which greatly improves the positioning ability of the V-CUT groove. Even if the V-CUT groove is very shallow on the circuit board, the V-CUT groove will not jump out of the guide knife. Circumstances to avoid defective products.
3. All cutting blades are calibrated with a laser dual-frequency laser interferometer to ensure that the back knife can accurately continue cutting in the groove cut by the front knife. The runout of the knife tip is not more than 0.02mm to ensure perfect cutting quality.
4. A stainless steel platform with laser scale positioning function can be added (1.2m or 2.4m optional)
| Host size: | 325mm*385mm*350mm |
| Plus platform size: | 1200 x 506x 350 (1.2M) Weight: 9KG |
| 2400 x 506 x 350 (2.4M) Weight: 17KG | |
| Maximum sub-board length: | Unlimited |
| Splitting speed: | 80, 120, 200, 400mm/sec |
| Power: | 60W |
| Tool material: | SKD61 high speed steel |
| Board thickness: | 0.2-3mm |
| Machine weight: | 1.2M—41KG; 2.4M—49KG |
HXT-720 Application:
Using a unique cutting method, circuit board cutting is completed by six blades, and the upper and lower blades form a group to form a cutting unit. They are A, B, C, three groups. The whole cutting process is divided into three stages. The blades of group A first cut 40% of the circuit board, and then the blades of group B run over the groove cut by blade A again, completing 40% of the cutting volume again, and finally the blades of group C cut the final 20% of the cutting and smoothing, because the amount of cutting each time is small, the stress generated during the cutting process is reduced by more than 80% compared with the traditional one-time cutting method. The edge of the divided circuit board is smooth and smooth, and the surface of the board is very smooth, not twisted or warped. It is the only machine on the market that can guarantee that the aluminum substrate will not be deformed after cutting.
a. Mainly used in electronics, electrical appliances, lighting, medical, new energy vehicles, automobiles and other electronic technology industries.
Widely used in electronics manufacturing, consumer electronics, automobile electronics, communications equipment, aerospace, medical equipment, LED lamps, computers and peripherals, smart home, smart logistics, miniature and high power ratio electronic devices.