Shenzhen Hongxinteng Technology Co., Ltd.
Add to Cart
Circuit Board Seperatot Automatic Milling Cutter PCB Cutting Machine V Cut Grooving HXT-620 Machine pcb Cutter circuit Board Separator Machine
Advantage:
1. Adopt the latest gas-electric lightweight design, and complete the cutting stroke without shear stress at one time, especially suitable for cutting precision SMD or thin plates. There is no bow wave (BOW WAVES) and micro cracks ( MICRO CRACK), using a wedge cutter to linearly divide the board, the shear stress is minimized, so that sensitive SMD components and even capacitors are not affected, and the potential quality risk of the product is minimized. The cutting tool is made of high-speed steel precision grinding, which can be repeatedly ground and used, and is also suitable for thin plate separation operations without V-CUT.
Features:
1. Guillotine work, suitable for PCBs of various thicknesses, the thickness of the cutting board is below 1-2mm, there is no concern about the operation safety, and the cutting stress is within 200
2. Reduce the internal stress generated when cutting the board to below 180uE to avoid tin cracking and damage to precision parts
3. The minimum width between the V-groove edge and the part can be cut at 0.3mm, and the height is 70mm
4. The cutting rate is 1 second/1 division, controlled by the pedal pneumatic switch.
5. The cutting knife group is passively activated, which can safely grasp the cutting line and position; the cutting stress is small, and it is not easy to form cracks
6. Non-roller (wheel knife, walking knife) cutting, no dust phenomenon, no motor drive, no toner pollution
7. The warranty of the blade is 300,000/time without power supply, so there is no loss of electrical products and no need for replacement
8. Use 5-7KG air pressure, no specific cutting place is required; the appearance can be wiped with anti-rust maintenance oil
| Dimensions: | L700*W260*H460mm |
| Iron frame size: | L760*W420*H705mm |
| Board thickness: | 0.2-5.0mm |
| Working pressure: | 0.50-0.70Mpa dry air source |
| Tool material: | SKD61 high speed steel |
| Operating temperature: | 10-35℃ |
| Storage temperature: | -20-50℃ |
| Power supply: | 220V/50HZ, 25W |
| Machine weight + shelf weight: | 140+12.5KG |
HXT-620 Application:
It adopts the latest gas-electric lightweight design, and completes the plate cutting stroke without shear stress at one time, especially suitable for cutting precision SMD or thin plates. There is no bow wave (BOW WAVES) and micro cracks (MICRO CRACK) produced when the round knife type plate is divided. ), using a wedge cutter to linearly split the board, the shear stress is minimized, so that sensitive SMD components and even capacitors are not affected, and the potential quality risk of the product is minimized.
a. Mainly used in electronics, electrical appliances, lighting, medical, new energy vehicles, automobiles and other electronic technology industries.
Widely used in electronics manufacturing, consumer electronics, automobile electronics, communications equipment, aerospace, medical equipment, LED lamps, computers and peripherals, smart home, smart logistics, miniature and high power ratio electronic devices.