LED V-cut PCB Separator for PCB Double Circular Cutter Machine HXT-502 Aluminum SMT Fiber Cutting Machine For SMT Assembling Line Production

Standard Equipment Introduction

1.Before using the equipment, please refer to the [Preparation before use] and [Knife adjustment] sections to ensure that the equipment and knives are not abnormal.

2.After checking the equipment, it can be connected to the power supply.

3.As shown in Figure 2, turn on the power switch, and turn the forward, reverse and stop switches to the positive position. At this time, the lower circular knife starts to rotate, and adjust it to a suitable speed through the speed control knob.

4.Start to cut the board: Hold one side of the v-cut board tightly with both hands, keep the board surface perpendicular to the knife, align the v-groove with the tip of the knife and send the board to cut in parallel.

Note: During use, please pay attention to safety! According to the condition of the cutting board, adjust the cutter properly to achieve the best.

Product Specification

Product details

HXT-501 applies to:

The single-knife splitting machine adopts the latest light-weight design of the knife, and must complete the micro-shear stress cutting stroke, which is used to cut PCB boards with V-CUT grooves.

a. Mainly used in electronic technology industries such as electronics, electrical appliances, lighting, medical care, new energy vehicles, and automobiles.

Applications:

Widely used in electronics manufacturing, consumer electronics, automobile electronics, communications equipment, aerospace, medical equipment, LED lamps, computers and peripherals, smart home, smart logistics, miniature and high power ratio electronic devices.