Automatic UV curing furnace machine lamp oven resin drying uv light furnaces oven uv drying curing Furnace uv glue Ink varnish line dryer uv curing machine

Description

• Introduction of UV curing furnace product function

• UV curing furnace, also known as UV curing furnace, is a use of ultraviolet (UV) curing equipment. Its core function is to make coatings, adhesives and other materials rapidly solidified by ultraviolet radiation, so as to obtain high-strength coating or adhesive layer. UV curing furnace usually consists of the following main components:

• Feed zone: raw materials (such as substrates, coatings, inks, etc.) are fed into the feed zone through an automatic feed device to ensure a stable supply.

• The levelling drying area: the hot air heater uses the hot air generated by the nozzle or fan to dry the coating or ink to realize the levelling effect.

• Uv-cured area: equipped with an ultraviolet lamp, it produces high-energy ultraviolet light that irradiates onto the surface of a coating or ink, triggering a photochemical reaction that rapidly solidifies it.

• Tunnel furnace: Burns a fuel to produce a high-temperature gas that further heats and solidifies a coating or ink. .

• Discharge area: cured coating or ink products are removed from the discharge area, usually equipped with an automatic discharge device.

• How It Works

• UV curing furnace through photoinitiator and high-performance lamp to achieve rapid polymerization. In the flat drying zone, hot air transfers heat energy to the material surface through conduction and convection, which makes it evaporate and dry quickly. In the UV curing zone, UV radiation to the coating or ink surface, causing photochemical reaction, so that the rapid curing. The operation of the whole equipment is usually monitored and regulated by the control system to ensure the coordination of the various parts and the production efficiency.

• Application Area

• UV curing furnace is widely used in a variety of industries, including electronics, automotive, printing, medical equipment. In electronics, it is used for curing the protective layer of PCB board, Chip package and display screen coating; in automotive, it is used for curing the lamp, decorative parts and adhesive materials; in printing, it is used for curing the coating of PCB board, for UV ink fast drying and curing; in the production of medical devices, used for medical catheter, syringe and other products fast curing.

• Advantage

• Efficient and energy-saving: the energy efficiency of UVLED light source is much higher than that of traditional mercury lamp light source. It can cure in a shorter time, increase production efficiency, and reduce energy consumption at the same time.

• Environmental Protection: UV LED light source does not contain mercury and other toxic substances. It meets the requirements of environmental protection and does not produce harmful gases

Product Specification

Product details